Realtek HDAUDIO

OSS specific BSD discussion (FreeBSD/NetBSD/OpenBSD)

Moderators: cesium, dev, kodachi, hannu

Realtek HDAUDIO

Postby Jango Sapien » Mon Aug 07, 2006 6:40 pm

I have just recently setup freebsd on my new laptop. It is an Acer Aspire 5102 with AMD Turion 64 X2.

I'm running FreeBSD 6.1 i386.

My sound card is
none1@pci0:20:2: class=0x040300 card=0x009f1025 chip=0x437b1002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
class = multimedia


Here is part of the logfile.

Starting OSS/FreeBSD 3.99.4b Mon Aug 7 13:20:47 CDT 2006
1:20PM up 32 mins, 1 user, load averages: 0.29, 0.22, 0.22
======= config =====
# Use soundconf to edit this file.
/SECUREAUDIO OFF
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI437b1002 #ATI High Definition Audio
HDAUDIO ON
#NEEDS_MMPCI
====== pnpres.dat ========
====================
Warning: Some of the devices failed to initialize
OSS/FreeBSD 3.99.4b (C) 4Front Technologies 1996-2006

License serial number: E00000010
**** UNREGISTERED VERSION ****

Drivers: ALL
License will expire after: 12/2006


*** Unregistered version ***

Build: 200607070150
Kernel: FreeBSD 6.1-STABLE #0: Wed Aug 2 14:57:04 CDT 2006
root@sifl:/usr/obj/usr/src/sys/SIFL


Card config:
(Intel High Definition Audio (Azalia) controller at 0xc0000000 irq 16)

Audio devices:

Synth devices:

Midi devices:

Mixers:
========== dmesg printout follows ========

...
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
Jango Sapien
New Member
 
Posts: 1
Joined: Mon Aug 07, 2006 6:32 pm

Re: Realtek HDAUDIO

Postby dev » Fri Aug 11, 2006 5:59 pm

Jango Sapien wrote:I have just recently setup freebsd on my new laptop. It is an Acer Aspire 5102 with AMD Turion 64 X2.

I'm running FreeBSD 6.1 i386.

My sound card is
none1@pci0:20:2: class=0x040300 card=0x009f1025 chip=0x437b1002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
class = multimedia


Here is part of the logfile.

Starting OSS/FreeBSD 3.99.4b Mon Aug 7 13:20:47 CDT 2006
1:20PM up 32 mins, 1 user, load averages: 0.29, 0.22, 0.22
======= config =====
# Use soundconf to edit this file.
/SECUREAUDIO OFF
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI437b1002 #ATI High Definition Audio
HDAUDIO ON
#NEEDS_MMPCI
====== pnpres.dat ========
====================
Warning: Some of the devices failed to initialize
OSS/FreeBSD 3.99.4b (C) 4Front Technologies 1996-2006

License serial number: E00000010
**** UNREGISTERED VERSION ****

Drivers: ALL
License will expire after: 12/2006


*** Unregistered version ***

Build: 200607070150
Kernel: FreeBSD 6.1-STABLE #0: Wed Aug 2 14:57:04 CDT 2006
root@sifl:/usr/obj/usr/src/sys/SIFL


Card config:
(Intel High Definition Audio (Azalia) controller at 0xc0000000 irq 16)

Audio devices:

Synth devices:

Midi devices:

Mixers:
========== dmesg printout follows ========

...
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.


Hi,

Looks like some kind of power management fucntion hasn't turned on the device - can you check if the laptop works with the FreeBSD HDaudio drivers?

We're going to try and get a few Laptops inhouse because for some reason the desktops have no problems with audio.


Can you kindly check if running soundoff and soundon a second time fixes the problems?


regards
Dev Mazumdar
dev
Developer
 
Posts: 577
Joined: Fri Sep 12, 2003 6:08 am
Location: Culver City, CA

Re: Realtek HDAUDIO

Postby dev » Sat Aug 12, 2006 7:23 pm

Jango Sapien wrote:I have just recently setup freebsd on my new laptop. It is an Acer Aspire 5102 with AMD Turion 64 X2.

I'm running FreeBSD 6.1 i386.

My sound card is
none1@pci0:20:2: class=0x040300 card=0x009f1025 chip=0x437b1002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
class = multimedia


Here is part of the logfile.

Starting OSS/FreeBSD 3.99.4b Mon Aug 7 13:20:47 CDT 2006
1:20PM up 32 mins, 1 user, load averages: 0.29, 0.22, 0.22
======= config =====

# Use soundconf to edit this file.
/SECUREAUDIO OFF
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI437b1002 #ATI High Definition Audio
HDAUDIO ON
#NEEDS_MMPCI
====== pnpres.dat ========
====================
Warning: Some of the devices failed to initialize
OSS/FreeBSD 3.99.4b (C) 4Front Technologies 1996-2006

License serial number: E00000010
**** UNREGISTERED VERSION ****

Drivers: ALL
License will expire after: 12/2006


*** Unregistered version ***

Build: 200607070150
Kernel: FreeBSD 6.1-STABLE #0: Wed Aug 2 14:57:04 CDT 2006
root@sifl:/usr/obj/usr/src/sys/SIFL


Card config:
(Intel High Definition Audio (Azalia) controller at 0xc0000000 irq 16)

Audio devices:

Synth devices:

Midi devices:

Mixers:
========== dmesg printout follows ========

...
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.
hdaudio: RIRB timeout
hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia) controller failed.



Hi,


We have released OSS v4.0-beta for FreeBSD AMD64 and i386. Get
the pkg from http://www.4front-tech.com/test/oss-fre ... -amd64.tbz

To install this FreeBSD pkg

1) uninstall the 3.99.4 version by typing /usr/lib/oss/scripts/uninstall.sh
2) reboot
3) pkgadd oss-freebsd-v4.0-160-amd64.tbz
3) run soundon (/usr/sbin/soundon) and then run osstest and see if audio works.

Kindly email me at support@opensound.com with the ossinfo output.

best regards
Dev Mazumdar
dev
Developer
 
Posts: 577
Joined: Fri Sep 12, 2003 6:08 am
Location: Culver City, CA

the same problem with ATI HDAUDIO

Postby argent_smith » Mon Dec 18, 2006 1:37 pm

soundon.log:

Code: Select all
-------------------------------------------------------------
OSS version:  4.0rc2 (build 179/200611230255)
Kernel version:  FreeBSD paul-book.rtelekom.net 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May 7 04:42:56 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
+++ ossinfo -v3 +++
/dev/mixer: No such file or directory
+++ /dev/sndstat +++
OSS 4.0rc2 (build 179/200611230255) (C) 4Front Technologies 1996-2006

**** UNREGISTERED VERSION ****

This OSS version will expire after:  Jun 2007
Kernel: FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP


Audio devices:

MIDI devices:
  *** MIDI support not available in this OSS version ***

Mixers:


NOTICE! This /dev/sndstat file is obsolete - use the ossinfo command instead
+++ dmesg +++
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.02-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
  Cores per package: 2
real memory  = 468254720 (446 MB)
avail memory = 448622592 (427 MB)
ACPI APIC Table: <PTLTD      APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib3
ohci0: <ATI SB400 USB Controller> mem 0xd0004000-0xd0004fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd0005000-0xd0005fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xd0006000-0xd0006fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
ugen0: vendor 0x0402 USB2.0 Camera, rev 2.00/1.00, addr 2
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0210000-0xd02100ff irq 21 at device 1.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:d4:18:87:8b
pci6: <network, ethernet> at device 2.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> mem 0xd0211000-0xd0211fff irq 20 at device 4.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci6: <memory, flash> at device 4.1 (no driver attached)
pci6: <base peripheral> at device 4.2 (no driver attached)
pci6: <memory, flash> at device 4.3 (no driver attached)
pci6: <memory, flash> at device 4.4 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 95396MB <HTS541010G9AT00 MBZOA60A> at ata0-master UDMA100
acd0: DVDR <PIONEER DVD-RW DVR-K16RS/1.35> at ata0-slave UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s4a
dragon_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (dragon_saver, 0xc3200c50, 0) error 19
rl0: link state changed to UP
hdaudio: hdaudio: RIRB timeout (cad=3, nid=0, d=0, verb=f00, parm=0)
hdaudio: hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: hdaudio: Codec attach failed (-5)
hdaudio: hdaudio: RIRB timeout (cad=3, nid=0, d=0, verb=f00, parm=0)
hdaudio: hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: hdaudio: Codec attach failed (-5)
+++ pciconf +++
hostb0@pci0:0:0:   class=0x060000 card=0x009f1025 chip=0x59501002 rev=0x10 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:   class=0x060400 card=0x00000044 chip=0x5a3f1002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
pcib2@pci0:4:0:   class=0x060400 card=0x00000050 chip=0x5a361002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:5:0:   class=0x060400 card=0x00000050 chip=0x5a371002 rev=0x00 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
ohci0@pci0:19:0:   class=0x0c0310 card=0x009f1025 chip=0x43741002 rev=0x80 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
ohci1@pci0:19:1:   class=0x0c0310 card=0x009f1025 chip=0x43751002 rev=0x80 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
ehci0@pci0:19:2:   class=0x0c0320 card=0x009f1025 chip=0x43731002 rev=0x80 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = serial bus
    subclass = USB
none0@pci0:20:0:   class=0x0c0500 card=0x009f1025 chip=0x43721002 rev=0x83 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'SMBus'
    class    = serial bus
    subclass = SMBus
atapci0@pci0:20:1:   class=0x010182 card=0x009f1025 chip=0x43761002 rev=0x80 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'IDE Controller'
    class    = mass storage
    subclass = ATA
none1@pci0:20:2:   class=0x040300 card=0x009f1025 chip=0x437b1002 rev=0x01 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = multimedia
isab0@pci0:20:3:   class=0x060100 card=0x009f1025 chip=0x43771002 rev=0x80 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-ISA
pcib4@pci0:20:4:   class=0x060401 card=0x00000000 chip=0x43711002 rev=0x80 hdr=0x01
    vendor   = 'ATI Technologies Inc'
    class    = bridge
    subclass = PCI-PCI
hostb1@pci0:24:0:   class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb2@pci0:24:1:   class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb3@pci0:24:2:   class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb4@pci0:24:3:   class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
none2@pci1:5:0:   class=0x030000 card=0x009f1025 chip=0x59751002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = display
    subclass = VGA
rl0@pci6:1:0:   class=0x020000 card=0x009f1025 chip=0x813910ec rev=0x10 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none3@pci6:2:0:   class=0x020000 card=0x04181468 chip=0x001a168c rev=0x01 hdr=0x00
    vendor   = 'Atheros Communications Inc.'
    class    = network
    subclass = ethernet
cbb0@pci6:4:0:   class=0x060700 card=0x009f1025 chip=0x14121524 rev=0x10 hdr=0x02
    vendor   = 'ENE Technology Inc'
    device   = 'CB-712/714 CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
none4@pci6:4:1:   class=0x050100 card=0x009f1025 chip=0x05301524 rev=0x01 hdr=0x00
    vendor   = 'ENE Technology Inc'
    class    = memory
    subclass = flash
none5@pci6:4:2:   class=0x080501 card=0x009f1025 chip=0x05501524 rev=0x01 hdr=0x00
    vendor   = 'ENE Technology Inc'
    class    = base peripheral
none6@pci6:4:3:   class=0x050100 card=0x009f1025 chip=0x05201524 rev=0x01 hdr=0x00
    vendor   = 'ENE Technology Inc'
    class    = memory
    subclass = flash
none7@pci6:4:4:   class=0x050100 card=0x009f1025 chip=0x05511524 rev=0x01 hdr=0x00
    vendor   = 'ENE Technology Inc'
    class    = memory
    subclass = flash
+++ OSS devices +++
/dev/mixer: No such file or directory
ls: /dev/*_mid*: No such file or directory
ls: /dev/*_mix*: No such file or directory
ls: /dev/*_pcm*: No such file or directory
ls: /dev/*dsp*: No such file or directory
ls: /dev/*midi*: No such file or directory
ls: /dev/*mixer*: No such file or directory
/dev/mixer: No such file or directory
---------------------------------------------------------------


Kernel says:

Code: Select all
hdaudio: hdaudio: RIRB timeout (cad=3, nid=0, d=0, verb=f00, parm=0)
hdaudio: hdaudio_mixer_attach: Codec #3 is not responding
hdaudio: hdaudio: Codec attach failed (-5)


Notebook model is Acer Aspire 5102 WLMi
argent_smith
New Member
 
Posts: 1
Joined: Mon Dec 18, 2006 1:15 pm


Return to BSD

Who is online

Users browsing this forum: No registered users and 1 guest

cron