Open Sound System

by **gert cuykens** » Mon Mar 28, 2005 2:12 am

Code: Select all: FX-53R cat soundon.log Starting OSS/FreeBSD 3.99.2c Mon Mar 28 04:01:22 CEST 2005 4:01AM up 18 mins, 2 users, load averages: 0.00, 0.00, 0.03 ======= config ===== # Use soundconf to edit this file. /SECUREAUDIO OFF /PCIIRQ 5 11 /IRQEXCLUDE 3 4 /DMAEXCLUDE 2 -PCI00da10de #Nvidia nForce3 UART401 ON P300 I9 INTELPCI ON ====== pnpres.dat ======== ==================== Warning: Some of the devices failed to initialize SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.centervol 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.rearvol 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.rear2linejack ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.center2micjack OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.spkmode SPREAD SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.mix-lfe2front OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 mixext.mix-rear2front OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.enable ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.adc/dac OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.pro Consumer SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.audio AUDIO SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.copy OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.pre-emph OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.rate 48000 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d0 spdout.vbit OFF SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 autoreset ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.reverb.dry 0 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.reverb.wet 63 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.reverb.preset MEDIUM_ROOM SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.reverb.bypass ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.fidelity.level 128 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.fidelity.bypass ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.3dsurround.level 0 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 effects.3dsurround.bypass ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.prescale 255 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.lo 128 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.mid 128 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.hi 128 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.xhi 128 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 eq.bypass ON SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp3 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp4 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp5 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp6 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp7 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp8 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp9 100:100 SNDCTL_MIX_NREXT: Device not configured Command failed: /usr/lib/oss/bin/ossmix -q -d1 voices.dsp10 100:100 OSS/FreeBSD 3.99.2c (C) 4Front Technologies 1996-2004 License serial number: E00000008 **** UNREGISTERED VERSION **** Drivers: ALL License will expire after: 06/2005 *** Unregistered version *** Build: 200503231808 Kernel: FreeBSD 5.3-STABLE #0: Sat Jan 29 22:25:40 CET 2005 root@7rxI:/usr/obj/usr/src/sys/gert Card config: (MPU-401 (UART) at 0x300 irq 9) (Intel ICH AC97 audio controller at 0xe400 irq 5) Audio devices: Synth devices: Midi devices: Mixers: ========== dmesg printout follows ======== Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Sat Jan 29 22:25:40 CET 2005 root@7rxI:/usr/obj/usr/src/sys/gert Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 1073479680 (1023 MB) avail memory = 1026801664 (979 MB) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <nVidia nForce3 USB Controller> mem 0xff6fd000-0xff6fdfff irq 7 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <nVidia nForce3 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <nVidia nForce3 USB Controller> mem 0xff6fe000-0xff6fefff irq 5 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <nVidia nForce3 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <network, ethernet> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) atapci0: <nVidia nForce3 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 atapci1: <Promise PDC20378 SATA150 controller> port 0xc400-0xc47f,0xc800-0xc80f,0xcc00-0xcc3f mem 0xff4c0000-0xff4dffff,0xff4ff000-0xff4fffff irq 5 at device 8.0 on pci1 atapci1: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 ata4: channel #2 on atapci1 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400012043 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-107D/1.10> at ata0-master UDMA33 ad4: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata2-master SATA150 ad6: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata3-master SATA150 ar0: 141821MB <ATA RAID0 array> [18079/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-107D 1.10> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ar0s2a nv0: <NVIDIA nForce MCP3 Networking Adapter> port 0xec00-0xec07 mem 0xff6fc000-0xff6fcfff irq 11 at device 5.0 on pci0 nv0: Ethernet address 00:0e:a6:63:fb:ed nv0: Ethernet address: 00:0e:a6:63:fb:ed nv0: [GIANT-LOCKED] miibus0: <MII bus> on nv0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 2 0 0 0 done No buffers busy after final sync Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Sat Jan 29 22:25:40 CET 2005 root@7rxI:/usr/obj/usr/src/sys/gert Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 1073479680 (1023 MB) avail memory = 1026801664 (979 MB) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <nVidia nForce3 USB Controller> mem 0xff6fd000-0xff6fdfff irq 7 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <nVidia nForce3 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <nVidia nForce3 USB Controller> mem 0xff6fe000-0xff6fefff irq 5 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <nVidia nForce3 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <network, ethernet> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) atapci0: <nVidia nForce3 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 atapci1: <Promise PDC20378 SATA150 controller> port 0xc400-0xc47f,0xc800-0xc80f,0xcc00-0xcc3f mem 0xff4c0000-0xff4dffff,0xff4ff000-0xff4fffff irq 5 at device 8.0 on pci1 atapci1: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 ata4: channel #2 on atapci1 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400012135 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-107D/1.10> at ata0-master UDMA33 ad4: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata2-master SATA150 ad6: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata3-master SATA150 ar0: 141821MB <ATA RAID0 array> [18079/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-107D 1.10> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ar0s2a nv0: <NVIDIA nForce MCP3 Networking Adapter> port 0xec00-0xec07 mem 0xff6fc000-0xff6fcfff irq 11 at device 5.0 on pci0 nv0: Ethernet address 00:0e:a6:63:fb:ed nv0: Ethernet address: 00:0e:a6:63:fb:ed nv0: [GIANT-LOCKED] miibus0: <MII bus> on nv0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 0 2 0 0 0 done No buffers busy after final sync Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Sat Jan 29 22:25:40 CET 2005 root@7rxI:/usr/obj/usr/src/sys/gert Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 FX-53 Processor (2400.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 1073479680 (1023 MB) avail memory = 1026801664 (979 MB) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <nVidia nForce3 USB Controller> mem 0xff6fd000-0xff6fdfff irq 7 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <nVidia nForce3 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <nVidia nForce3 USB Controller> mem 0xff6fe000-0xff6fefff irq 5 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <nVidia nForce3 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <network, ethernet> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) atapci0: <nVidia nForce3 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 atapci1: <Promise PDC20378 SATA150 controller> port 0xc400-0xc47f,0xc800-0xc80f,0xcc00-0xcc3f mem 0xff4c0000-0xff4dffff,0xff4ff000-0xff4fffff irq 5 at device 8.0 on pci1 atapci1: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 ata4: channel #2 on atapci1 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2400012043 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-107D/1.10> at ata0-master UDMA33 ad4: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata2-master SATA150 ad6: 70911MB <WDC WD740GD-00FLA0/21.08U21> [144073/16/63] at ata3-master SATA150 ar0: 141821MB <ATA RAID0 array> [18079/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-107D 1.10> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ar0s2a nv0: <NVIDIA nForce MCP3 Networking Adapter> port 0xec00-0xec07 mem 0xff6fc000-0xff6fcfff irq 11 at device 5.0 on pci0 nv0: Ethernet address 00:0e:a6:63:fb:ed nv0: Ethernet address: 00:0e:a6:63:fb:ed nv0: [GIANT-LOCKED] miibus0: <MII bus> on nv0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. oss: Probing the hardware for MPU-401 (UART) failed. AC97: Codec/mixer chip doesn't seem to be alive. oss: Probing the hardware for Intel ICH AC97 audio controller failed. FX-53R

Code: Select all: FX-53R cat osstest.log NOTICE! You don't have any audio devices available. It looks like your audio hardware was not recognized by OSS. Please contact 4Front technologies for help (http://www.opensound.com/support.cgi). Don't forget to include your soundon.log file to the support request. FX-53R

I updated the last driver and i think i did something wrong again :roll:

by **gert cuykens** » Fri Apr 01, 2005 1:56 am

Does dev have time to ssh and take a look

May be its a bug

by **gert cuykens** » Fri Apr 01, 2005 3:15 am

i downloaded the driver again and i really think its not me this time ?

It always tells me
AC97: Codec/mixer chip doesn't seem to be alive.

But it works fine in windows and it always worked fine with the old driver ?

by **dev** » Fri Apr 01, 2005 6:23 am

gert cuykens wrote:i downloaded the driver again and i really think its not me this time ?

It always tells me
AC97: Codec/mixer chip doesn't seem to be alive.

But it works fine in windows and it always worked fine with the old driver ?

I've just tested my nForce2 motherboard with a ALC650 and FreeBSD 5.3 and I have it working. The reason for AC97 not being active is perhaps due to Power management or ACPI (or check your BIOS if you'eve enabled any PM support - disable it in the BIOS). Alternatively boot the machine with ACPI support and see if that works.

I've got no other good ideas. If AC97 probe returns saying AC97 not alive, then there's something wrong with AC97 codec chip.

Do you remember what the old version of OSS detected for the AC97?
(do you have old soundon.logs?). Perhaps can you try using the FreeBSD kernel driver to see what it detects? It's likely that some things were changed in the Ac97 settings for specific AC97 devices and that could be the reason that the device is powered down.

best regards
Dev

by **gert cuykens** » Fri Apr 01, 2005 10:48 pm

the freebsd drivers tell me this ?

FX-53R kldload /usr/src/sys/modules/sound/driver/ich/snd_ich.ko
FX-53R kldstat
Id Refs Address Size Name
1 9 0xffffffff80100000 5b49f0 kernel
2 1 0xffffffffa75ff000 add4 if_nv.ko
3 1 0xffffffffa7856000 1cd blank_saver.ko
4 1 0xffffffffa7924000 227d snd_ich.ko
5 1 0xffffffffa7927000 12e1a sound.ko

FX-53R dmesg

pcm0: <nVidia nForce3> port 0xe400-0xe47f,0xe800-0xe8ff mem 0xff6fb000-0xff6fbfff irq 5 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: cannot reset channel 0
pcm0: unable to initialize the card
device_attach: pcm0 attach returned 6

Whats wrong :cry:

by **dev** » Sat Apr 02, 2005 4:35 am

gert cuykens wrote:the freebsd drivers tell me this ?

FX-53R kldload /usr/src/sys/modules/sound/driver/ich/snd_ich.ko
FX-53R kldstat
Id Refs Address Size Name
1 9 0xffffffff80100000 5b49f0 kernel
2 1 0xffffffffa75ff000 add4 if_nv.ko
3 1 0xffffffffa7856000 1cd blank_saver.ko
4 1 0xffffffffa7924000 227d snd_ich.ko
5 1 0xffffffffa7927000 12e1a sound.ko

FX-53R dmesg

pcm0: <nVidia nForce3> port 0xe400-0xe47f,0xe800-0xe8ff mem 0xff6fb000-0xff6fbfff irq 5 at device 6.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: cannot reset channel 0
pcm0: unable to initialize the card
device_attach: pcm0 attach returned 6

Whats wrong

Bingo....even FreeBSD's ICH drivers don't work. I've actually just
finished testing Solaris on a Nforce3 motherboard (some Asus k8n bla-bla)

and it works in Solaris and the same driver is compiled for freebsd so it should work as well.

Disable APM/ACPI in the bios and/or if your BIOS has something like AC97 modem - disable that (or enable it if it's disabled) and see if that works.

best regards
Dev

by **gert cuykens** » Sat Apr 02, 2005 4:47 am

i have been testing and testing and testing and this is what made the sound work BUT there is a BUT

BIOS
-------
AUDIO [ENABLED]
IOAPIC [ENABLED]
ACPI 2.0 [YES]
ACPI-APIC [DISABLED]
BIOS-AML-ACPI-TABLE [DISABLED]

Now when i did that it made the mixer work but still output errors when doing osstest
So after banging my head on my desk saying why every time my head hit the table. I remembert the only thing i ever did was adding this

FX-53R kldstat
Id Refs Address Size Name
1 9 0xffffffff80100000 5b49f0 kernel
2 1 0xffffffffa75ff000 add4 if_nv.ko <--------------
3 1 0xffffffffa7856000 1cd blank_saver.ko
4 1 0xffffffffa7924000 227d snd_ich.ko
5 1 0xffffffffa7927000 12e1a sound.ko

As soon as i removed the nvidia network driver kaboom sounds works again.

Does dev know how to fix this and make oss and net driver work togheter ?

by **dev** » Sat Apr 02, 2005 7:30 am

gert cuykens wrote:i have been testing and testing and testing and this is what made the sound work BUT there is a BUT

BIOS
-------
AUDIO [ENABLED]
IOAPIC [ENABLED]
ACPI 2.0 [YES]
ACPI-APIC [DISABLED]
BIOS-AML-ACPI-TABLE [DISABLED]

Now when i did that it made the mixer work but still output errors when doing osstest
So after banging my head on my desk saying why every time my head hit the table. I remembert the only thing i ever did was adding this

FX-53R kldstat
Id Refs Address Size Name
1 9 0xffffffff80100000 5b49f0 kernel
2 1 0xffffffffa75ff000 add4 if_nv.ko <--------------
3 1 0xffffffffa7856000 1cd blank_saver.ko
4 1 0xffffffffa7924000 227d snd_ich.ko
5 1 0xffffffffa7927000 12e1a sound.ko

As soon as i removed the nvidia network driver kaboom sounds works again.

Does dev know how to fix this and make oss and net driver work togheter ?

This is not an OSS issue but something with the network driver - The fact that both OSS and the FreeBSD drivers work by disabling the if_nv driver means that the if_nv driver is accessing some power management stuff that is incorrectly programmed and takes down all devices.

Disable ACPI 2.0 and see what happens.

best regards
Dev Mazumdar

by **Guest** » Sat Apr 02, 2005 11:21 pm

no ACPI 2 doesnt cahnge anything
If i even enable ACPI-APIC freebsd doesnt even start up in a acpi default mode. But then if i disable it windows xp doesnt start up. man nforce 3 sucks

by **poker casino709** » Sun Feb 19, 2006 3:11 am

poker casino http://www.online-21-poker-kiszka-blada.com

Open Sound System

nforce 3

nforce 3

poker casino709

Who is online