minimac FreeBSD 7 OSS und kein Ton

OSS specific BSD discussion (FreeBSD/NetBSD/OpenBSD)

Moderators: cesium, dev, kodachi, hannu

minimac FreeBSD 7 OSS und kein Ton

Postby bonso » Wed Aug 23, 2006 5:03 pm

schoenen tag auch,
ich habe wie oben steht auf meinem minimac FreeBSD7 und OSS installiert, aber ich ich bekomm einfach kein Ton aus der kiste.....

kann mir geholfen werden?

Code: Select all
mac# /usr/lib/oss/bin/soundon
**** UNREGISTERED VERSION ****


Thank you for installing Open Sound System

This unregistered version is FULLY FUNCTIONAL. You may use the unregistered
version for personal/non-commercial use only. All features of the registered
version are included in this package with the exception of technical support.

The easiest way to order OSS is using the 'Order permanent OSS license' option
of the soundconf program. Alternatively you can order the license from our
web site at: http://www.opensound.com/order.html


Open Sound System started OK.




Code: Select all
mac# /usr/lib/oss/bin/ossmix -D
0:
Device root '' /
1: ******* Extension entries ********
2: Group: 'connector', parent=0
3: Enumerated control: 'green' (connector.green), parent=2, flags=3  Current value=0
4: Enumerated control: 'lineout1' (connector.lineout1), parent=2, flags=3  Current value=0
5: Enumerated control: 'speaker' (connector.speaker), parent=2, flags=3  Current value=0
6: Enumerated control: 'lineout2' (connector.lineout2), parent=2, flags=3  Current value=0
7: Group: 'connector', parent=0
8: Enumerated control: 'lineout3' (connector.lineout3), parent=7, flags=3  Current value=0
9: Enumerated control: 'blue' (connector.blue), parent=7, flags=3  Current value=2
10: Enumerated control: 'white1' (connector.white1), parent=7, flags=3  Current value=1
11: Enumerated control: 'white2' (connector.white2), parent=7, flags=3  Current value=1
12: Group: 'connector', parent=0
13: Enumerated control: 'lineout4' (connector.lineout4), parent=12, flags=3  Current value=0
14: Enumerated control: 'lineout5' (connector.lineout5), parent=12, flags=3  Current value=0
15: Stereo slider: 'pcm-front' (pcm-front), parent=0, max=127, flags=3  Current value=0x4141
16: Stereo slider: 'pcm-center/LFE' (pcm-center/lfe), parent=0, max=127, flags=3  Current value=0x4747
17: Stereo slider: 'pcm-side' (pcm-side), parent=0, max=127, flags=3  Current value=0x4a4a
18: Stereo slider: 'pcm-rear' (pcm-rear), parent=0, max=127, flags=3  Current value=0x3030
19: Stereo slider: 'rec1' (rec1), parent=0, max=14, flags=3  Current value=0x0000
20: Stereo slider: 'rec2' (rec2), parent=0, max=14, flags=3  Current value=0x0000
21: Stereo slider: 'spdifin' (spdifin), parent=0, max=14, flags=3  Current value=0x0000
22: Group: 'select1', parent=0
23: Enumerated control: 'src' (select1.src), parent=22, flags=3  Current value=1
24: Stereo slider: 'vol' (select1.vol), parent=22, max=4, flags=3  Current value=0x0202
25: Group: 'select2', parent=0
26: Enumerated control: 'src' (select2.src), parent=25, flags=3  Current value=3
27: Stereo slider: 'vol' (select2.vol), parent=25, max=4, flags=3  Current value=0x0707
28: Mono slider: 'beep' (beep), parent=0, max=3, flags=3  Current value=0x0000
29: Group: 'select3', parent=0
30: Group: 'select1', parent=29
31: Stereo slider: '-' (select3.select1), parent=30, max=14, flags=3  Current value=0x0909
32: Group: 'select4', parent=0
33: Group: 'select2', parent=32
34: Stereo slider: '-' (select4.select2), parent=33, max=14, flags=3  Current value=0x0909




Code: Select all
mac# cat /dev/sndstat
OSS/FreeBSD 3.99.4b (C) 4Front Technologies 1996-2006

License serial number: E00000010
**** UNREGISTERED VERSION ****

Drivers: ALL
License will expire after: 12/2006


*** Unregistered version ***

Build: 200607070150
Kernel: FreeBSD 7.0-CURRENT-200606 #0: Sun Jun  4 16:51:08 UTC 2006
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC


Card config:
Intel High Definition Audio (Azalia) controller at 0x90440000 irq 22

Audio devices:
0: Intel High Definition Audio pcm-front output
   Opened by 8060 @ 44100/44100 Hz
1: Intel High Definition Audio pcm-center/LFE output
2: Intel High Definition Audio pcm-side output
3: Intel High Definition Audio pcm-rear output
4: Intel High Definition Audio spdifout1 output
5: Intel High Definition Audio spdifout2 output
6: Intel High Definition Audio rec1 input
7: Intel High Definition Audio rec2 input
8: Intel High Definition Audio spdifin input
9: OSS Virtual Mixer v2.5 Playback CH #0 (GRC3)
10: OSS Virtual Mixer v2.5 Playback CH #1 (GRC3)
11: OSS Virtual Mixer v2.5 Playback CH #2 (GRC3)
12: OSS Virtual Mixer v2.5 Playback CH #3 (GRC3)
13: OSS Virtual Mixer v2.5 Playback CH #4 (GRC3)
14: OSS Virtual Mixer v2.5 Playback CH #5 (GRC3)
15: OSS Virtual Mixer v2.5 Playback CH #6 (GRC3)
16: OSS Virtual Mixer v2.5 Playback CH #7 (GRC3)

Synth devices:
0: OSS Virtual Synth v2.5

Midi devices:

Mixers:
0: Intel High Definition Audio STAC9221 A1
1: Virtual Mixer


History:
dsp8: pid 7902 IN
dsp6: pid 7902 IN
dsp4: pid 7902 IN
dsp3: pid 7902 IN
dsp1: pid 7902 IN





Code: Select all
mac# /usr/lib/oss/bin/ossmix
Selected mixer 0/
Known controls are:
        connector.green <pcm-front|mic-in|line-in> (currently pcm-front)
        connector.lineout1 <pcm-side|mic-in|line-in> (currently pcm-side)
        connector.speaker <pcm-center/LFE|mic-in|line-in> (currently pcm-center/LFE)
        connector.lineout2 <pcm-front|mic-in|line-in> (currently pcm-front)
        connector.lineout3 <mic-in|line-in> (currently mic-in)
        connector.blue <pcm-rear|mic-in|line-in> (currently line-in)
        connector.white1 <spdifout1|select3|vendor|mic-in|line-in> (currently select3)
        connector.white2 <mic-in|line-in> (currently line-in)
        connector.lineout4 <mic-in|line-in> (currently mic-in)
        connector.lineout5 <spdifout2|mic-in|line-in> (currently spdifout2)
        pcm-front <both/leftvol>[:<rightvol>] (currently 65:65)
        pcm-center/lfe <both/leftvol>[:<rightvol>] (currently 71:71)
        pcm-side <both/leftvol>[:<rightvol>] (currently 74:74)
        pcm-rear <both/leftvol>[:<rightvol>] (currently 48:48)
        rec1 <both/leftvol>[:<rightvol>] (currently 0:0)
        rec2 <both/leftvol>[:<rightvol>] (currently 0:0)
        spdifin <both/leftvol>[:<rightvol>] (currently 0:0)
        select1.src <lineout3|lineout4|blue|lineout1|speaker|lineout2|green> (currently lineout4)
        select1.vol <both/leftvol>[:<rightvol>] (currently 2:2)
        select2.src <lineout3|lineout4|blue|lineout1|speaker|lineout2|green> (currently lineout1)
        select2.vol <both/leftvol>[:<rightvol>] (currently 7:7)
        beep <monovol> (currently 0)
        select3.select1 <both/leftvol>[:<rightvol>] (currently 9:9)
        select4.select2 <both/leftvol>[:<rightvol>] (currently 9:9)
bonso
New Member
 
Posts: 2
Joined: Wed Aug 23, 2006 4:51 pm

i can hear no peep

Postby bonso » Sun Sep 03, 2006 10:18 pm

on my minimac i cant install FreeBSD 6
so i have a big problem with the sound

can anybody help me....?
bonso
New Member
 
Posts: 2
Joined: Wed Aug 23, 2006 4:51 pm


Return to BSD

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest

cron