sound issues

[Sanjuro]

In KDE or Windowmaker when there is sound or music playing the sound comes out very strange like a fuzzy-rattlesnaketail like sound. When I try playing mp3s that strange fuzzy noise is there, however, it sounds like a song is playing under it but very low. I also get error messages in KDE saying "Sound server fatal error:
AudioSubSystem::handleIO: write failed
len = 472, can_write = 3765, errno = 4 (Interrupted system call)
This might be a sound hardware/driver specific problem (see aRts FAQ)"

I have tried having the sound turned on at boot but there is no difference.

Also, when I test the sound in soundconf it is normal for some reason.

[Freedevil]

make sure kde is using the oss sound daemon.

[abzn]

make sure kde is using the oss sound daemon.

My KDE use oss sound daemon, but i have problem like someone once posted.
Sound server fatal error:
AudioSubSystem::handleIO: write failed
len = -1, can_write = 3768, errno = 35 (Resource temporarily unavailable)
This might be a sound hardware/driver specific problem (see aRts FAQ)

I use ATI AC 97 sound card, FreeBSD 5.4, latest version oss

[dev]

make sure kde is using the oss sound daemon.

My KDE use oss sound daemon, but i have problem like someone once posted.
Sound server fatal error:
AudioSubSystem::handleIO: write failed
len = -1, can_write = 3768, errno = 35 (Resource temporarily unavailable)
This might be a sound hardware/driver specific problem (see aRts FAQ)

I use ATI AC 97 sound card, FreeBSD 5.4, latest version oss

Increase the fragment size setting in the Artsd (look in the sound server
setting).

Also ensure that you remove full duplex setting in Artsd.

regards

Dev Mazumdar

[BSDKaffee]

To get aRts to work reasonably with OSS, I had to disable Realtime priority and increase the soundbuffer to the maximum. I still have full duplex enabled. aRts worked alot better on a real channel, but with those tweaks, it was fine on a virtual channel.

[ALe}{]

make sure kde is using the oss sound daemon.

My KDE use oss sound daemon, but i have problem like someone once posted.
Sound server fatal error:
AudioSubSystem::handleIO: write failed
len = -1, can_write = 3768, errno = 35 (Resource temporarily unavailable)
This might be a sound hardware/driver specific problem (see aRts FAQ)

I use ATI AC 97 sound card, FreeBSD 5.4, latest version oss

Increase the fragment size setting in the Artsd (look in the sound server
setting).

Also ensure that you remove full duplex setting in Artsd.

regards

Dev Mazumdar

can u explaint how to do it in details plz?

[ALe}{]

here is my /dev/sndstat:

Code: Select all

OSS/FreeBSD 3.99.3d (C) 4Front Technologies 1996-2004

License serial number: E00000008
**** UNREGISTERED VERSION ****

Drivers: ALL
License will expire after: 06/2006


*** Unregistered version ***

Build: 200602030536
Kernel: FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC


Card config:
(MPU-401 (UART) at 0x300 irq 10)
Intel ICH AC97 audio controller at 0xe100 irq 20

Audio devices:
0: Nvidia CK8 (DUPLEX,GRC3)
1: Nvidia CK8 (shadow) (DUPLEX,GRC3)
2: Nvidia CK8 (S/PDIF) (GRC3)
3: OSS Virtual Mixer v2.5 Playback CH #0 (GRC3)
4: OSS Virtual Mixer v2.5 Playback CH #1 (GRC3)
5: OSS Virtual Mixer v2.5 Playback CH #2 (GRC3)
6: OSS Virtual Mixer v2.5 Playback CH #3 (GRC3)
7: OSS Virtual Mixer v2.5 Playback CH #4 (GRC3)
8: OSS Virtual Mixer v2.5 Playback CH #5 (GRC3)
9: OSS Virtual Mixer v2.5 Playback CH #6 (GRC3)
10: OSS Virtual Mixer v2.5 Playback CH #7 (GRC3)

Synth devices:
0: OSS Virtual Synth v2.5

Midi devices:

Mixers:
0: AC97 Mixer (ALC655)
1: Virtual Mixer

History:
dsp0: pid 1325 cmd 'artsd' IN OUT
dsp0: pid 1325 cmd 'artsd' IN OUT 132 overruns
dsp0: pid 1334 cmd 'artsd' IN OUT
dsp0: pid 1334 cmd 'artsd' IN OUT
dsp0: pid 1334 cmd 'artsd' IN OUT 58 overruns


[dev]

make sure kde is using the oss sound daemon.

My KDE use oss sound daemon, but i have problem like someone once posted.
Sound server fatal error:
AudioSubSystem::handleIO: write failed
len = -1, can_write = 3768, errno = 35 (Resource temporarily unavailable)
This might be a sound hardware/driver specific problem (see aRts FAQ)

I use ATI AC 97 sound card, FreeBSD 5.4, latest version oss

Increase the fragment size setting in the Artsd (look in the sound server
setting).

Also ensure that you remove full duplex setting in Artsd.

regards

Dev Mazumdar

can u explaint how to do it in details plz?

Please read README.KDE-Gnome in /usr/lib/oss/docs - it tells you how to setup arts.

Also, be sure to update the system as there are some fixes regarding mmap and Non-blocking I/O that arts may be doing as well. Run /usr/lib/oss/bin/ossupdate to make sure.


best regards
Dev Mazumdar

[ALe}{]

Please read README.KDE-Gnome in /usr/lib/oss/docs - it tells you how to setup arts.

there is no KDE Control Panel in KDE 3.4 how to manual configure arts ?

[BSDKaffee]

there is no KDE Control Panel in KDE 3.4 how to manual configure arts ?

Of course there is. Click on the K Menu and "Control Center" is listed right on the menu.

If it's not there, open up a Konsole window and type: kcontrol

[poker casino685]

poker casino http://www.online-175-poker-kiszka-blada.com